Dynamic Routing RIP
Dynamic routing is included in the category of distance vector, where the best path calculation based on the number of routers that pass. Maximum hop count (jumps) between routers as many as 15, if more than that data packets will didiscard. Configure RIP routing simply register the network address that is connected directly and will be in exchange routing tables to neighboring network to update / introduce a network address.
-
The software that i use is cisco packet tracer v.5.3
- Next step by step Router configuration :
R1 :
R1>en
R1#conf t
R1(config)#router rip
R1(config-router)#network 192.168.1.0
R1(config-router)#network 10.1.1.0
R1(config-router)#network 10.1.1.8
R1(config-router)#version 2
R2 :
R2>en
R2#conf t
R2(config)#router rip
R2(config-router)#network 192.168.2.0
R2(config-router)#network 10.1.1.0
R2(config-router)#network 10.1.1.4
R2(config-router)#version 2
R3 :
R3>en
R3#conf t
R3(config)#router rip
R3(config-router)#network 192.168.3.0
R3(config-router)#network 10.1.1.4
R3(config-router)#network 10.1.1.8
R3(config-router)#version 2
Routing table
R1 :
R1#sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is not set
10.0.0.0/30 is subnetted, 3 subnets
C 10.1.1.0 is directly connected, Serial2/0
R 10.1.1.4 [120/1] via 10.1.1.2, 00:00:18, Serial2/0
[120/1] via 10.1.1.9, 00:00:23, Serial3/0
C 10.1.1.8 is directly connected, Serial3/0
C 192.168.1.0/24 is directly connected, FastEthernet0/0
R 192.168.2.0/24 [120/1] via 10.1.1.2, 00:00:18, Serial2/0
R 192.168.3.0/24 [120/1] via 10.1.1.9, 00:00:23, Serial3/0
R2 :
R2#sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is not set
10.0.0.0/30 is subnetted, 3 subnets
C 10.1.1.0 is directly connected, Serial2/0
C 10.1.1.4 is directly connected, Serial3/0
R 10.1.1.8 [120/1] via 10.1.1.1, 00:00:17, Serial2/0
[120/1] via 10.1.1.6, 00:00:01, Serial3/0
R 192.168.1.0/24 [120/1] via 10.1.1.1, 00:00:17, Serial2/0
C 192.168.2.0/24 is directly connected, FastEthernet0/0
R 192.168.3.0/24 [120/1] via 10.1.1.6, 00:00:01, Serial3/0
R3 :
R3#sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is not set
10.0.0.0/30 is subnetted, 3 subnets
R 10.1.1.0 [120/1] via 10.1.1.5, 00:00:17, Serial3/0
[120/1] via 10.1.1.10, 00:00:16, Serial2/0
C 10.1.1.4 is directly connected, Serial3/0
C 10.1.1.8 is directly connected, Serial2/0
R 192.168.1.0/24 [120/1] via 10.1.1.10, 00:00:16, Serial2/0
R 192.168.2.0/24 [120/1] via 10.1.1.5, 00:00:17, Serial3/0
C 192.168.3.0/24 is directly connected, FastEthernet0/0
Testing koneksi (PING)
R1 à PC 2 :
R1#ping 192.168.2.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.2.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 46/68/93 ms
R1 à PC 3 :
R1#ping 192.168.3.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.3.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 78/103/125 ms
R3 à PC1 :
R3#ping 192.168.1.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 62/84/110 ms
R3 à PC2 :
R3#ping 192.168.2.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.2.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 78/97/125 ms